The most interesting contact in the CQ WW Contest

Sometimes looking up remote stations on QRZ.com or other sites gives a glimpse of the person behind the callsign. I did this for the Chinese station BY5CD which I contacted on 40 m during the CQ Worldwide contest this weekend.

It turned out to be a club station called "YinZhou Middle School Amateur Radio Club Station" which is located just south of Shanghai.

It is interesting to consider the age of the operators as one can see from the picture. More pictures and some information can be found on their QRZ.com website. With this many young people entering ham radio in China, maybe we will see more stations there in the future. The number of stations is unreasonably low compared to the enormous population of China.

And the most interesting signal was that of GM5X on 21 MHz at 1207 UTC on 25. November. It had a distinct echo which seems to indicate that the signal travelled both on the direct path of about 800 km and the long path of about 39200 km.

The image shows "GM5X GM5X Test". The long path signal seems to fade in and out as there is much less of it in the last part, the word "test", than in the second "GM5X".

F/LA3ZA on Long Delayed Echoes

Laurent, F6GOX, who is one of the primary forces behind the ARP, Radio-Club de Paris, has written a nice little French-language presentation of me since I am a former member of the club. It also includes my interest in Long Delayed Echos (LDE).

Here he also talks about the presentation I gave for the Paris club of radio amateurs on 18 March 2009 on this subject during my year-long stay in Paris. That was a very nice evening which I remember with pleasure.

I also talked then about the interest that the French general Gustave Ferrié (1868 - 1932) took in this phenomenon (The link is in French, but read about Ferrié here in the English Wikipedia). There were French studies of LDEs in Indochina, Senegal, and Mauretania, French territories at the time, which he played a major role in.


Merci Laurent!

Visiting 409shop in Hong Kong

A stop-over on my way from Sydney to Oslo gave me the opportunity today to visit Apliu street in Hong Kong. This is where all the electronics products are found. As I had purchased a Baofeng UV-5R from them before it was fun to stop by the 409shop as well. Their address is on their web site, and the word "showroom" really made me expect something larger than what I found. It turns out to be just one small store among hundreds of others in this street.

I bought a handheld frequency counter, Yaege FC-1, and a better antenna, Nagoya NA-666, for the UV-5R and got a good deal - I like to think that it is because I presented myself as a previous internet customer.

On the other side of the street there was another store with communications equipment as well, Yee Fu Technology Shop, where I bought a 13.8V/20 A switch mode power supply, HK Products Electronics SPS-200MA.

It even had a noise-offset control which I have come to appreciate in my other power supply, the Alinco DM-330MV. It is particularly nice to have on 160 m. How they avoid Alinco's pending patent on this feature is something I don't know. There seems to be several other supplies on the market with this feature also, such as the Watson Power-Mite-NF (NF for Noise offset Function), so maybe Alinco's patent application hasn't been granted?

A Useless Machine with delay and howl

The useless machine or ultimate machine originates from Claude Shannon, the scientist who figured out how to find the channel capacity in a communications system. I bought the basic machine as a kit from Solarbotics.

But then I added a few features:

• A delay circuit that makes it look more alive as it gives the impression of doing some thinking before it responds to the switch.
• Sound that varies with how open the lid is and the amount of light that hits the photosensitive resistor. It was inspired by the design of the Growl and Scream Altoids of FightCube.
• A couple of LEDs, a red one when it opens and a blue one when it closes.

The circuits were built on small pieces of veroboard and the circuit diagram can be downloaded from here. In retrospect I'm not completely happy with the sound, it could have growled and screamed even more, but then how much effort can one really justify putting into a project which is - useless - anyway?

My first 24 hours on WSPR

My first beacon on 30 m, a free-running Ultimate QRSS kit (no GPS) has now been running for a full 24 hours using the Weak Signal Propagation Reporter (WSPR) mode. The figure comes from the WSPRnet page.

With an output power of about 150 mW to an 80 m horizontal loop it has not been possible to reach beyond Europe so far. Perhaps this will happen in the future with better conditions and/or with some more output power.

Added 26.9.2012: I made it for the first time across the Atlantic!
Timestamp           Call       MHz         SNR Drift  Grid      Pwr Reporter   RGrid      km      az
2012-09-26 00:50, LA3ZA, 10.140262, -26,   -2,   JO59fu, 0.2, WB2EEE, FN21xh, 5852, 290

Altoids Projects

Press image for magnification

I like to build small electronics projects and like many others I have found the small Altoids tins to be excellent enclosures. 

These tins are inexpensive, well shielded, easy to work with, and least but not least they enable you to make experimental circuits that are sturdy enough that they can be reused later.

Pictured here is a collection of projects I have built over the years with the hope that  they may inspire others.

Noisy Designer Lamp

Herstal pendant lamp,
type 06

Some years ago I had this annoying noise that made listening for weak signals on several of the shortwave radio bands virtually impossible. In the end I was finally able to track down the noise source: Our beautiful Danish Herstal designer lamps in the kitchen. Actually it wasn't the lamps themselves, but the dimmable switch mode power supply that came with them.

After some years of always having to remember to turn them off, in the end I just replaced the original noisy dimmer with a fixed voltage, noiseless, electronic transformer and inserted lower wattage 12 V light bulbs in the two lamps.

The original dimmer came in its own nice conical designer housing and inside one finds a more ordinary plastic housing. And of course it is marked with the CE mark, thus indicating that it should be fine with respect to noise.

Fixing my Lithuanian oscilloscope

I visited Riga, Latvia with a youth group which we as a family were involved with in 1992, and there I stumbled upon a Soviet oscilloscope in a department store. It was from the neighboring country, Lithuania, and was manufactured in Vilnius, the capital. The markings say what I guess means "Made in the Soviet Union". At least it says CCCP in the upper right-hand corner. I remember these letters very well as all Soviet athletes used to have them on their backs.

The oscilloscope came with full documentation, even with a bilingual manual. I had grown fond of this oscilloscope as it was lightweight and simple to use once I had learned what the Russian markings meant. It is a typical instrument for TV-repair with a 7 MHz bandwidth.

Now after 20 years, I was therefore very sad when it malfunctioned. This was the time to test if the manual was helpful or not. The symptom was that the beam no longer could span the whole screen in the X-direction. Even with the Horizontal positioning all the way to the left one could barely see the beam.

I opened the bilingual manual only to discover that the two languages were Russian and Lithuanian!