Showing posts with label K3NG keyer. Show all posts
Showing posts with label K3NG keyer. Show all posts

06 November, 2016

Yet another Arduino clock

Does the world need more Arduino clocks? Maybe not.

But I needed another Arduino project as I had made a K3NG morse keyer. I love this keyer because it is unique in supporting a display where you can see what you send. But I wasn't using the morse keyer all the time, so I wanted the hardware to serve two purposes. That's the excuse for also making a clock.

Its main features are:
  • Controlled by a GPS module outputting data over a serial interface, and handled with the TinyGPS++ library
  • Shows raw GPS data such as UTC time and date, position, altitude, and number of satellites
  • Shows derived GPS data such as 6-digit locator
  • Finds local time and handles daylight saving automatically using the Timezone library
  • Finds local sunset and sunrise, either actual value, or civil, nautical, or astronomical. The library is Sunrise.
  • The clock also gives local solar height based on the Sunpos library from the K3NG rotator controller. 
  • Finally, the clock also provides the lunar phase based on ideas found here.
The hardware for the K3NG keyer includes a speed pot and a memory bank selector (to the right) as well as four push buttons on top for selecting memories. The pot now controls the intensity of the display, but the bank selector switch is not used. Of the four push buttons, only button 1 is used (later two are used). With it one can toggle the clock through various displays as shown below.

Local time, solar and lunar state
Line 1: Local day, date, time
Line 2: Sunrise, maximum solar elevation (actual solar angle during the day), sunset
Line 3: Civil dawn, local time at maximum solar elevation, civil dusk
Line 4: Lunar phase, arrow showing that it is rising, days since new moon

19 March, 2014

Proposal for a fourth ultimatic mode: First paddle priority

The ultimatic mode is an alternative to the iambic mode for sending Morse code from a dual lever paddle. When pressing both paddles the last one to be pressed takes control, rather than the alternating dit-dah or dah-dit of the iambic mode.

In the K1EL Winkeyers there are actually three ultimatic priority modes. This is shown in the table below that comes from page 9 in the specification for the command for setting the PINCFG Register. (K1EL CW Keyer IC for Windows Winkeyer2 v23 10/5/2010). This is a de facto standard for interfacing to and controlling a keyer, as an example it is used in the K3NG Arduino Open Source Morse keyer.


K1EL has defined bits 6 and 7 for setting this up by remote command. I propose that the last possibility, '11', presently undefined and unused, be used for a new mode. This mode is "First paddle priority" meaning that the last paddle which is pressed is ignored. It can also be interpreted as an emulation of a single-lever paddle. I and others have found that helpful in eliminating errors when keying. See for instance "Single Paddle operation with Iambic paddles" by Larry Winslow, W0NFU, in QST, October 2009 and the Iambic to Single Paddle kit from WB9KZY or my earlier blog post "Single-lever and ultimatic adapter".

My proposal is that the bits for the ultimatic mode be used like this:
  • 00 - Last paddle priority, i.e normal ultimatic
  • 01 - Dah priority
  • 10 - Dit priority
  • 11 - First paddle priority or Single Paddle Emulation (New)

Related posts:

10 March, 2014

Non-English display for the K3NG Arduino Morse keyer

German, Swedish, Danish, Norwegian, Finnish, and some Spanish characters in the display are now supported by the K3NG Arduino Open Source Morse keyer. I have worked with OZ1JHM, Hjalmar and K3NG, Anthony, in order to implement this using the 8 custom-designed characters of the LCD display (based on the Hitachi HD44780). This should satisfy the call I had for such support here on this blog last year: Which non-English Morse characters are the most important ones?

Here are examples using the phonetic alphabets of these languages.
  1. For Norwegians and Danes - Æ, Ø, Å:
  2. Norwegian: Ærlig Østen Åse

    Danish: Ægir Ødis Åse