Morserino now supports Single Paddle Emulation

Picture credit Morserino-32

I was happy to see the other day that the nice-looking Morserino keyer with its modern display in its latest firmware, version 1.3, now supports a new mode. It is described as follows:

A new mode in addition to Iambic A, Iambic B and Ultimatic: Non-Squeeze. This "simulates" the behavior of a single lever paddle when using a dual lever paddle. 

Operators used to single lever paddles tend to have difficulties using dual-lever paddles, as they sometimes inadvertently squeeze the paddles, especially at higher speeds. The non-squeeze mode just ignores squeezing, making it easier for these operators to use a dual lever paddle.

Proposal for a fourth ultimatic mode: First paddle priority

The ultimatic mode is an alternative to the iambic mode for sending Morse code from a dual lever paddle. When pressing both paddles the last one to be pressed takes control, rather than the alternating dit-dah or dah-dit of the iambic mode.

In the K1EL Winkeyers there are actually three ultimatic priority modes. This is shown in the table below that comes from page 9 in the specification for the command for setting the PINCFG Register. (K1EL CW Keyer IC for Windows Winkeyer2 v23 10/5/2010). This is a de facto standard for interfacing to and controlling a keyer, as an example it is used in the K3NG Arduino Open Source Morse keyer.

K1EL has defined bits 6 and 7 for setting this up by remote command. I propose that the last possibility, '11', presently undefined and unused, be used for a new mode. This mode is "First paddle priority" meaning that the last paddle which is pressed is ignored. It can also be interpreted as an emulation of a single-lever paddle. I and others have found that helpful in eliminating errors when keying. See for instance "Single Paddle operation with Iambic paddles" by Larry Winslow, W0NFU, in QST, October 2009 and the Iambic to Single Paddle kit from WB9KZY or my earlier blog post "Single-lever and ultimatic adapter".

My proposal is that the bits for the ultimatic mode be used like this:

• 00 - Last paddle priority, i.e normal ultimatic
• 01 - Dah priority
• 10 - Dit priority
• 11 - First paddle priority or Single Paddle Emulation (New)

---

Related posts:

• Single-lever and ultimatic adapter
• Is the ultimatic Morse keyer really that efficient?

Single-lever and ultimatic adapter

Photo @LA3ZA 

Here's an adapter that emulates both a single-lever paddle mode and the ultimatic mode. It is meant to go between a dual-lever paddle and an iambic keyer. The adapter has been implemented in an AVR Butterfly in C and it is compatible with Morse keyers such as the one in the Elecraft K3 and the K1EL WKUSB. The single-lever emulation is probably the most novel part and it is meant to make it easier to practice single-lever keying on a dual-lever paddle.

The advantage of the single-lever paddle

My single-lever PCB keyer.

It may seem like a bad idea to downgrade from a dual-lever paddle and iambic keyer to a single-lever paddle. It must be inefficient since each individual dash and dot has to be generated by a right or left movement of the paddle. Despite this, many of the champions in the High Speed Telegraphy competitions use single-lever paddles, often home-made ones. How can that be?

K7QO, Chuck Adams, wrote "Using an Iambic Paddle" and compared the dual-lever paddle with the single-lever with respect to number of movements. If all 26 letters of the English alphabet and the numbers from 0 to 9 are sent, the single-lever paddle requires 73 strokes while a dual-lever and an iambic keyer requires 65. This is 11% less.

But when N1FN, Marshall G. Emm, wrote "Iambic Keying - Debunking the Myth" he analyzed the 7 letters that are faster to send with an iambic keyer - C, F, K, L, Y, Q, and R - and found that only one of them, the L, is among the 12 most frequent ones in English reducing the gain in efficiency to only 5%. He illustrated it this way:

Guess what't wrong with this figure? He didn't see the R and forgot that it is also among the most frequent letters.